Cisco 7821 Manual do utilizador - Página 8

Enter the e-mail address associated with this extension. This e-mail address will receive all

system notification messages. Example: [email protected]

Auto Provisioning

Set to Yes.

MAC Address

Enter Cisco 7821 device MAC address. Example: 0002FDFF1536. MAC address can be

found at the back of the phone.

Click on the Save button.

Creating Extension

Registering Phone

This chapter describes how to register Cisco 7821 device using DHCP, TFTP or HTTP.

The following topics are covered:

- DHCP

- TFTP or HTTP

DHCP

1. Configure DHCP

Make sure your DHCP router is configured to use option 66 to automatically instruct devices

with the URL for auto provisioning. For more information refer to your router documentation

or contact your network administrator.

2. Device first boot or user initiated reboot

Auto provisioning process will start during device first boot or after reboot process has been

initiated by user. DHCP server will instruct the device where from to pickup appropriate

configuration file. If everything is done as above described, you should have successfully

registered your device to PBXware.

TFTP or HTTP

1. Login to device web administration interface

Open a new browser window and enter your device IP address in order to access the device

web administration interface login screen. Example: http://192.168.1.22

Click on Admin Login in the top right corner of the administration interface.

Click on Advanced in the top right corner of the administration interface.