Cisco MX300 G2 Aan de slag handleiding - Pagina 16

Blader online of download pdf Aan de slag handleiding voor {categorie_naam} Cisco MX300 G2. Cisco MX300 G2 46 pagina's.
Ook voor Cisco MX300 G2: Installing (7 pagina's), Installing (7 pagina's), Snelle referentiehandleiding (2 pagina's), Snelle referentiehandleiding (2 pagina's), Snelle referentiehandleiding (2 pagina's), Snelle referentiehandleiding (2 pagina's), Snelle referentiehandleiding (2 pagina's)

Pagina afdrukken

Cisco TelePresence Video Systems

Contents

Setting date, time and location

(When not set by a provisioning system)

You should check that the date and time settings are correct

when you set up your video conference system. The system

uses this information for example to time stamp messages

transmitted to gatekeepers and other network elements.

You can find the time in the top right corner of the Touch

controller display.

Back to task overview

D14639.15 Video Systems Getting Started Guide TC7.2, OCTOBER 2014.

Introduction

User interfaces

1. Tap the user name in the upper left corner and tap

> Date, Time &

2. Tap

24h

3. Tap dd.mm.yy,

Format

you prefer.

4. Select the

of available zones by tapping the - or + signs.

5. Set

Date & Time Mode

be regularly updated; otherwise, select Manual.

a. If you select Manual, enter the correct value for Hour,

Minute, Year, Month, and Day. Tap the - and + signs to

increase or decrease a value.

b. If you select Auto, the NTP server address can be

automatically obtained from the network (set the

Mode

yourself (set

6. Tap

Save

to confirm the changes, or

saving.

7. Tap

Exit

to return to the home menu.

Configuration

Settings

Location.

12h

to select the

Time Format

you prefer.

mm.dd.yy

yy.mm.dd

to select the

OlsonZone

for your system. Step through the list

Auto

if you want time and date to

to Auto) or you can enter the

NTP Server

address

NTP Mode

to Manual).

Undo

to leave without

Appendices

Date

NTP

Getting Started Guide

Contacts