Cisco TelePresence SpeakerTrack 60 Camera-handleiding - Pagina 21
Blader online of download pdf Camera-handleiding voor {categorie_naam} Cisco TelePresence SpeakerTrack 60. Cisco TelePresence SpeakerTrack 60 40 pagina's. Telepresence
Ook voor Cisco TelePresence SpeakerTrack 60: Gegevensblad (3 pagina's), Installatiehandleiding (19 pagina's), Installatiehandleiding (14 pagina's), Handmatig (22 pagina's), Camera-handleiding (44 pagina's)
Pagina afdrukken
Cisco Quad Camera, Precision 60, SpeakerTrack 60 and PTZ-12 Camera
Contents
Connect SpeakerTrack 60 to Codec C40
•
Connect the video cables (HDMI).
Left camera: Connect between Connector 1 (HDMI input) on the
codec to the HDMI input of the left camera.
Right camera: Connect between Connector 2 (HDMI input) on the
codec to the HDMI input of the right camera.
•
Connect the camera control cable (Ethernet) between the
codec's 2nd Ethernet port and the Network port (Ethernet) on the
SpeakerTrack 60.
•
Connect the power adapter to the SpeakerTrack 60, and connect
to power.
•
Connect other codec cables as described in
Telepresence Codec C40 installation
HDMI 1
HDMI 2
D15296.10 Cisco Quad Camera, Precision 60, SpeakerTrack 60, and PTZ-12 Camera SEPTEMBER 2019.
Introduction
Physical interface
theCisco
guide.
RJ45
Power
(100-240 V
AC
Connecting to a codec
Connecting to a codec
When using a SpeakerTrack 60 with a C Series codec, the
codec cannot be controlled with the TRC5 (Cisco Remote
Control). Instead, a Cisco TelePresence Touch 8 user interface
or an external control device must be used.
Right
Power
adapter
Always use the provided power
, 50/60 Hz)
cable and adapter.
21
Factory reset
Appendix
Left
Copyright © 2019 Cisco Systems, Inc. All rights reserved.
Camera guide