Cisco TelePresence SpeakerTrack 60 카메라 매뉴얼 - 페이지 21
{카테고리_이름} Cisco TelePresence SpeakerTrack 60에 대한 카메라 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco TelePresence SpeakerTrack 60 40 페이지. Telepresence
Cisco TelePresence SpeakerTrack 60에 대해서도 마찬가지입니다: 데이터시트 (3 페이지), 설치 매뉴얼 (19 페이지), 설치 매뉴얼 (14 페이지), 매뉴얼 (22 페이지), 카메라 매뉴얼 (44 페이지)
페이지 인쇄
Cisco Quad Camera, Precision 60, SpeakerTrack 60 and PTZ-12 Camera
Contents
Connect SpeakerTrack 60 to Codec C40
•
Connect the video cables (HDMI).
Left camera: Connect between Connector 1 (HDMI input) on the
codec to the HDMI input of the left camera.
Right camera: Connect between Connector 2 (HDMI input) on the
codec to the HDMI input of the right camera.
•
Connect the camera control cable (Ethernet) between the
codec's 2nd Ethernet port and the Network port (Ethernet) on the
SpeakerTrack 60.
•
Connect the power adapter to the SpeakerTrack 60, and connect
to power.
•
Connect other codec cables as described in
Telepresence Codec C40 installation
HDMI 1
HDMI 2
D15296.10 Cisco Quad Camera, Precision 60, SpeakerTrack 60, and PTZ-12 Camera SEPTEMBER 2019.
Introduction
Physical interface
theCisco
guide.
RJ45
Power
(100-240 V
AC
Connecting to a codec
Connecting to a codec
When using a SpeakerTrack 60 with a C Series codec, the
codec cannot be controlled with the TRC5 (Cisco Remote
Control). Instead, a Cisco TelePresence Touch 8 user interface
or an external control device must be used.
Right
Power
adapter
Always use the provided power
, 50/60 Hz)
cable and adapter.
21
Factory reset
Appendix
Left
Copyright © 2019 Cisco Systems, Inc. All rights reserved.
Camera guide