Cisco TelePresence SX10 Voorlopige gebruikershandleiding - Pagina 5

Blader online of download pdf Voorlopige gebruikershandleiding voor {categorie_naam} Cisco TelePresence SX10. Cisco TelePresence SX10 9 pagina's. In-room control on touch 10
Ook voor Cisco TelePresence SX10: Installatiehandleiding (8 pagina's), Gebruikershandleiding (26 pagina's), Beknopte handleiding (2 pagina's), Gebruikershandleiding (34 pagina's), Gebruikershandleiding (29 pagina's), Gebruikershandleiding (38 pagina's), Installatiehandleiding (8 pagina's), Gebruikershandleiding (2 pagina's), Gebruikershandleiding (37 pagina's), Handmatig (45 pagina's), Handmatig (45 pagina's), Installatiehandleiding (2 pagina's), Gebruikershandleiding (34 pagina's), Gebruikershandleiding (5 pagina's), Gebruikershandleiding (38 pagina's), Gebruikershandleiding (38 pagina's), Aan de slag handleiding (46 pagina's), Beknopte handleiding (2 pagina's)

Pagina afdrukken
Cisco TelePresence SX10 Voorlopige gebruikershandleiding
Getting started
5

Accessing the Settings

Available
is currently
selected.
To access the
Settings move
cursor to here
and press OK.
To put system
in Standby
immediately,
move cursor to
here and press
OK.
Move cursor to this field and press OK (Center key on the remote control).
Keys used
for this.
1
2
3
.@
abc
def
4
5
6
ghi
jkl
mno
7
8
9
pqrs
tuv
wxyz
0
*
#
The options available
The upper left field provides
access to Settings and Standby.
The Settings will normally be
password protected by your
system administrator.
If you move the cursor to Standby
and press OK, the system will
immediately enter Standby.
You may also select between being
Available or not (called Do not
disturb).
In the Do not disturb mode you
will be able to place calls as usual,
but anyone trying to call you will
perceive you as not being present.
To exit this field, press the back
arrow, if needed.
Preliminary User Guide for SX10
Produced: 01.2014
All contents © 2014
Cisco Systems, Inc. All rights reserved.