Cisco TelePresence SX10 Installatiehandleiding - Pagina 3

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Cisco TelePresence SX10. Cisco TelePresence SX10 8 pagina's. In-room control on touch 10
Ook voor Cisco TelePresence SX10: Installatiehandleiding (8 pagina's), Gebruikershandleiding (26 pagina's), Beknopte handleiding (2 pagina's), Gebruikershandleiding (34 pagina's), Gebruikershandleiding (29 pagina's), Voorlopige gebruikershandleiding (9 pagina's), Gebruikershandleiding (38 pagina's), Gebruikershandleiding (2 pagina's), Gebruikershandleiding (37 pagina's), Handmatig (45 pagina's), Handmatig (45 pagina's), Installatiehandleiding (2 pagina's), Gebruikershandleiding (34 pagina's), Gebruikershandleiding (5 pagina's), Gebruikershandleiding (38 pagina's), Gebruikershandleiding (38 pagina's), Aan de slag handleiding (46 pagina's), Beknopte handleiding (2 pagina's)

Before mounting the SX10

Mount the screen

For the best conferencing experience,

mount the screen at 130-145 cm

(4 ft 3 in.- 4 ft 9 in.) height.

For pre-installed and larger screens,

placing the SX10 under the screen

may work better. Connect the cables,

and set the device on a table or a shelf

under the screen to check the image

before wall mounting the SX10.

For more on room guidelines and recommendations for other scenarios visit:

collaborationhelp.cisco.com and www.cisco.com/go/projectworkplace

Measure screen depth to determine the SX10 installation height

The thicker the screen, the further up from the screen you should install the SX10.

This is to ensure that the screen doesn't block the camera view.

Display depth

<100 mm

<3.94 in.

100 - 130 mm

3.94 - 5.12 in.

130 - 150 mm

5.12 - 5.91 in.

150 - 170 mm

5.91 - 6.69 in.

170 - 190 mm

6.69 - 7.48 in.

Wall mount height

110 mm

4.33 in.

130 mm

5.12 in.

150 mm

5.91 in.

170 mm

6.69 in.

185 mm

7.48 in.

130 - 145 cm

4 ft 3 in.- 4 ft 9 in.