Cisco TelePresence SX10 Handmatig - Pagina 21

Blader online of download pdf Handmatig voor {categorie_naam} Cisco TelePresence SX10. Cisco TelePresence SX10 45 pagina's. In-room control on touch 10
Ook voor Cisco TelePresence SX10: Installatiehandleiding (8 pagina's), Gebruikershandleiding (26 pagina's), Beknopte handleiding (2 pagina's), Gebruikershandleiding (34 pagina's), Gebruikershandleiding (29 pagina's), Voorlopige gebruikershandleiding (9 pagina's), Gebruikershandleiding (38 pagina's), Installatiehandleiding (8 pagina's), Gebruikershandleiding (2 pagina's), Gebruikershandleiding (37 pagina's), Handmatig (45 pagina's), Installatiehandleiding (2 pagina's), Gebruikershandleiding (34 pagina's), Gebruikershandleiding (5 pagina's), Gebruikershandleiding (38 pagina's), Gebruikershandleiding (38 pagina's), Aan de slag handleiding (46 pagina's), Beknopte handleiding (2 pagina's)

Pagina afdrukken

Toggle button

Table of contents

Introduction

A two-state switch which indicates either on or off.

Create a user interface

Events

API for in-room control

Changed

Widgets

Command reference

Troubleshooting

Tips and tricks

Examples

In-Room Control on Touch 10

for Cisco TelePresence

MX200 G2, MX300 G2,

MX700, MX800,

SX10, SX20, SX80

Collaboration Endpoint

software version CE8.2

Commands

D15358.02 - JULY 2016

www.cisco.com

The visual appearance of the button changes immediately when you

tap it. However, the control system must always send a

command to the video system when the button toggles between on

and off. This ensures that the status is updated accordingly.

off

Triggered when the button is released.

Value: <on/off>

Example of use: Anything that can be turned on or off, for example

lights, fan, and projector. You can use a toggle button together with a

slider for lights that can be dimmed.

Example:

Press "on" on the toggle button with WidgetId =

"togglebutton".

*e UserInterface Extensions Event Changed Signal: "togglebutton:on"

** end

<Event>

<WidgetId item="1">togglebutton</WidgetId>

<Type item="1">changed</Type>

</Action>

</Widget>

</Extensions>

</UserInterface>

</Event>

Example:

Set the button with WidgetId = "togglebutton" to "on".

xCommand UserInterface Extensions Widget SetValue

WidgetId: "togglebutton" Value: "on"

SetValue

Terminal mode

XML mode