Cisco TelePresence SX10 Gebruikershandleiding - Pagina 4

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Cisco TelePresence SX10. Cisco TelePresence SX10 5 pagina's. In-room control on touch 10
Ook voor Cisco TelePresence SX10: Installatiehandleiding (8 pagina's), Gebruikershandleiding (26 pagina's), Beknopte handleiding (2 pagina's), Gebruikershandleiding (34 pagina's), Gebruikershandleiding (29 pagina's), Voorlopige gebruikershandleiding (9 pagina's), Gebruikershandleiding (38 pagina's), Installatiehandleiding (8 pagina's), Gebruikershandleiding (2 pagina's), Gebruikershandleiding (37 pagina's), Handmatig (45 pagina's), Handmatig (45 pagina's), Installatiehandleiding (2 pagina's), Gebruikershandleiding (34 pagina's), Gebruikershandleiding (38 pagina's), Gebruikershandleiding (38 pagina's), Aan de slag handleiding (46 pagina's), Beknopte handleiding (2 pagina's)

Pagina afdrukken

Cisco TelePresence SX10 Gebruikershandleiding

3. Camera Control

While on a call, there may be capability to control the camera on both sides of the call. Camera control

on your side of the call is called

A. Near End Camera Control

i. While on a call or not on a call (as shown here),

move the cursor up to the upper right corner to the

'Camera'

icon. Press

'OK'

iii. You may now adjust the pan, zoom and tilt of the

camera. Use

'Increase'/ 'Decrease'

control to adjust the zoom and the cursor controls to

adjust the pan and tilt. Press

B. Far End Camera Control

i. Navigate to

'Participants'

corner and press

'OK'

list of the participants will then appear.

iii. To control the far end camera, navigate to

'Camera'

and click

'OK'

'Near End'

and on the other side of the call is called

on the remote control.

controls on the remote

'Back'

to exit the menu.

in the upper right

on the remote control. A

on the remote control.

'Far End.'

ii. The

'Camera'

icon will now appear. Press

again on the remote control.

ii. A menu showing a list of the participants on

the call will now appear. Navigate to the

participant whose camera you want to control

and press

'OK'

on the remote control.

A submenu will now appear.

Note:

if you select

'Drop'

be disconnected from the call.

iv. Adjust the pan, tilt and zoom and use

'Back'

on the remote control to exit.

'OK'

that participant will

'OK'

August 2019