Cisco 2100 Series Snelstarthandleiding - Pagina 5
Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Cisco 2100 Series. Cisco 2100 Series 12 pagina's. Cisco 8500 series
wireless lan controller
Ook voor Cisco 2100 Series: Configuratiehandleiding (40 pagina's), Snelstarthandleiding (49 pagina's), Configuratiehandleiding (50 pagina's)
Pagina afdrukken
Rack Mount the Hardware
LIN K
10 0M bp
s LIN
CO NS
ET HE RN
ET 0
ET HE RN
Installing Rack Mount
Hardware
This section describes how to install the
IE2100 Series in a standard 19-inch equipment rack.
A rack-mount kit is included for mounting the
system in a standard 19-inch equipment rack with
two unobstructed outer posts.
Note
You can place the system on a desktop or other
flat, stable surface. Self-adhesive rubber feet are
provided for this purpose.
Warning
The following guidelines are
provided to ensure your safety:
•
This unit should be mounted at the bottom of
the rack if it is the only unit in the rack.
•
When mounting this unit in a partially filled
rack, load the rack from the bottom to the top
with the heaviest component at the bottom of
the rack.
•
If the rack is provided with stabilizing devices,
install the stabilizers before mounting or
servicing the unit in the rack.
K 10 0M
bp s
DR IVE
0
DR IVE
ET 1
1
Phillips machine
screws
To install the IE2100 Series in a rack:
Step 1
Measure the rack to verify that the system
will fit.
Step 2
Attach the L brackets to the sides of the
chassis using the provided screws so that
the L-bracket mounting surfaces are even
with the front or back panel of the chassis,
depending on which way you want to
install it.
Step 3
Position the chassis in the rack.
Step 4
Align the four mounting holes in the
L bracket with the four mounting holes in
the equipment rack.
Step 5
Secure the system in the rack by installing
the provided screws through the elongated
holes in the L bracket and into the
threaded holes in the mounting post.
3