Cisco 2691 Series Snelstarthandleiding - Pagina 13
Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Cisco 2691 Series. Cisco 2691 Series 29 pagina's. Modular routers
Ook voor Cisco 2691 Series: Installeren en opmaken (34 pagina's), Gegevensblad (8 pagina's), Gebruikershandleiding (48 pagina's)
Pagina afdrukken
4
Connect Cables
Warning
Do not work on the system, or connect or disconnect cables during periods of lightning activity. Statement 1001
System Management Connections
The connections described in Table 1 provide system management access.
Table 1
System Management Connections
Port
Color
Console
Light blue PC or ASCII terminal communication port (usually labeled COM) RJ-45-to-DB-9 adapter cable
Auxiliary
Black
Power Connections
Warning
Read the installation instructions before connecting the system to the power source. Statement 1004
The installation must comply with all required electrical codes applicable at the installation site.
Note
Connecting Routers to AC Power
If your router uses AC power, connect it to a 15 A, 120 VAC (10 A, 240 VAC) circuit with overcurrent protection.
The input voltage tolerance limits for AC power are 85 and 264 VAC.
Note
Warning
AC connected units must have a permanent ground connection in addition to the power cable ground wire.
NEBS-compliant grounding satisfies this requirement. Statement 284
Warning
This product relies on the building's installation for short-circuit (overcurrent) protection. Ensure that the
protective device is rated not greater than:
15A, 120VAC (10A, 240VAC). Statement 1005
Connecting the Router to DC Power
If your router has a DC-input power supply, follow the directions in this section for proper wiring.
Warning
This product relies on the building's installation for short-circuit (overcurrent) protection. Ensure that the
protective device is rated not greater than:
15A, 60VDC. Statement 1005
Warning
Use copper conductors only. Statement 1025
Connected To:
Modem for remote access
Cable
RJ-45-to-DB-25 adapter cable
13