Cisco 2691 Series Посібник із швидкого старту - Сторінка 13

Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Мережеве обладнання Cisco 2691 Series. Cisco 2691 Series 29 сторінок. Modular routers
Також для Cisco 2691 Series: Встановлення та форматування (34 сторінок), Технічний паспорт (8 сторінок), Посібник користувача (48 сторінок)

Connect Cables

Warning

Do not work on the system, or connect or disconnect cables during periods of lightning activity. Statement 1001

The connections described in Table 1 provide system management access.

Table 1

System Management Connections

Port

Color

Console

Light blue PC or ASCII terminal communication port (usually labeled COM) RJ-45-to-DB-9 adapter cable

Auxiliary

Black

Warning

Read the installation instructions before connecting the system to the power source. Statement 1004

The installation must comply with all required electrical codes applicable at the installation site.

Note

If your router uses AC power, connect it to a 15 A, 120 VAC (10 A, 240 VAC) circuit with overcurrent protection.

The input voltage tolerance limits for AC power are 85 and 264 VAC.

Note

Warning

AC connected units must have a permanent ground connection in addition to the power cable ground wire.

NEBS-compliant grounding satisfies this requirement. Statement 284

Warning

This product relies on the building's installation for short-circuit (overcurrent) protection. Ensure that the

protective device is rated not greater than:

15A, 120VAC (10A, 240VAC). Statement 1005

If your router has a DC-input power supply, follow the directions in this section for proper wiring.

Warning

This product relies on the building's installation for short-circuit (overcurrent) protection. Ensure that the

protective device is rated not greater than:

15A, 60VDC. Statement 1005

Warning

Use copper conductors only. Statement 1025

Connected To:

Modem for remote access

Cable

RJ-45-to-DB-25 adapter cable