Configuring Radio Settings on an Access Point
Feature Information for Configuring Radio Settings on an Access
Point
Table 7
features that were introduced or modified in Cisco IOS Release 12.4T or later appear in the table.
For information on a feature in this technology that is not documented here, see the
LAN Features
Not all commands may be available in your Cisco IOS software release. For release information about a
specific command, see the command reference documentation.
Cisco IOS software images are specific to a Cisco IOS software release, a feature set, and a platform.
Use Cisco Feature Navigator to find information about platform support and Cisco IOS software image
support. Access Cisco Feature Navigator at http://www.cisco.com/go/fn. You must have an account on
Cisco.com. If you do not have an account or have forgotten your username or password, click Cancel at
the login dialog box and follow the instructions that appear.
Table 7
Note
Cisco IOS software release train. Unless noted otherwise, subsequent releases of that Cisco IOS
software release train also support that feature.
Table 7
Feature Information for Configuring Radio Settings on an Access Point
Feature Name
Access Point Link Role Flexibility
Universal Client Mode
Wireless Non-Root Bridge
lists the features in this module and provides links to specific configuration information. Only
Roadmap" module.
lists only the Cisco IOS software release that introduced support for a given feature in a given
Releases
12.4(15)T
12.4(15)T
12.4(15)T
Feature Information for Configuring Radio Settings on an Access Point
Feature Information
This feature allows access point radios to operate in a
combination of radio roles, such as access point root, access
point repeater, bridge root (with or without clients), bridge
nonroot (with or without clients), and WGB.
The following sections provide information about this
feature:
Configuring Universal Client Mode
•
This feature allows a wireless device to associate to other
Cisco and third-party APs.
The following sections provide information about this
feature:
Universal Client Mode
•
Configuring Universal Client Mode
•
This feature allows a wireless device to operate as the
remote node in a point-to-point or point-to-multi-point
network.
The following sections provide information about this
feature:
Configuring Universal Client Mode
•
"Cisco IOS Wireless
29
Pagina afdrukken