Feature Information for Configuring Radio Settings on an Access Point
Table 7
Feature Information for Configuring Radio Settings on an Access Point
Feature Name
Cisco Compatible Extensions Information
Element
Configurable Radio Transmit Power
Dynamic Frequency Selection (DFS) and IEEE
802.11h Transmit Power Control
IEEE 802.11 Wireless Standards Support
IEEE 802.11a Support
IEEE 802.11b Support
30
Releases
Feature Information
12.4T
This feature allows a Cisco access point to inform Cisco
Compatible Extension client devices about the
Cisco-compatible release version that the access point
supports.
The following sections provide information about this
feature:
Enabling and Disabling Aironet Extensions on an
•
Access Point, page 17
12.4T
This feature allows a user to set the transmit power of the
access point.
The following sections provide information about this
feature:
Configuring Radio and Client Device Power Levels on
•
an Access Point, page 6
12.4T
This feature allows a user to block groups of channels to
prevent an access point from selecting them when DFS is
enabled.
The following sections provide information about this
feature:
Configuring Dynamic Frequency Selection on an
•
Access Point, page 10
12.4T
This feature provides support for 802.11 standards, which
allows you to set channels, transmission rates, and
power-save mode, among other configurable fields.
The following sections provide information about this
feature:
•
Configuring Radio and Client Device Power Levels on
an Access Point, page 6
12.4T
This feature provides support for 802.11a standards, which
allows you to set channels, transmission rates, and
power-save mode, among other configurable fields.
The following sections provide information about this
feature:
Configuring Radio and Client Device Power Levels on
•
an Access Point, page 6
12.4T
This feature provides support for 802.11b standards, which
allows you to set channels, transmission rates, and
power-save mode, among other configurable fields.
The following sections provide information about this
feature:
Configuring Radio and Client Device Power Levels on
•
an Access Point, page 6
Configuring Radio Settings on an Access Point
Pagina afdrukken