Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion Installatie Opmerking - Pagina 16

Blader online of download pdf Installatie Opmerking voor {categorie_naam} Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion. Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion 24 pagina's. Distributed forwarding card 4 for ws-x68xx, ws-x69xx, and select ws-x67xx modules
Ook voor Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion: Installatie Opmerking (14 pagina's), Oplossingshandleiding (17 pagina's), Installatie Opmerking (46 pagina's), Witboek (19 pagina's), Beschrijving (1 pagina's), Product Bulletin (6 pagina's), Kennisgeving (4 pagina's), Gegevensblad (9 pagina's), Gegevensblad (18 pagina's), Witboek (18 pagina's), Configuratiehandleiding (8 pagina's), Installatie Opmerking (28 pagina's), Handleiding voor probleemoplossing (11 pagina's), Installatie Opmerking (18 pagina's), Gebruikershandleiding (17 pagina's), Handmatig (19 pagina's), Installatie Opmerking (36 pagina's)

Installing the CSM

Figure 6

Press left

Exerting too much pressure on the ejector levers will bend and damage them.

Caution

While pressing on the ejector levers, simultaneously close them to fully seat the supervisor engine

or module in the backplane connector. The ejector levers are fully closed when they are flush with

the module faceplate. (See

Catalyst 6500 Series Switch Content Switching Module Installation Note

Clearing the EMI Gasket in a Vertical Slot Chassis

FAN

STATUS

INPUT

FAN

OUTPUT

FAIL

INPUT

FAN

OUTPUT

FAIL

Figure

Gap between the module

EMI gasket and the

module above it

1 mm

7.)

78-15751-01