Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion Installatie Opmerking

Blader online of download pdf Installatie Opmerking voor {categorie_naam} Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion. Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion 18 pagina's. Distributed forwarding card 4 for ws-x68xx, ws-x69xx, and select ws-x67xx modules
Ook voor Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion: Installatie Opmerking (14 pagina's), Oplossingshandleiding (17 pagina's), Installatie Opmerking (46 pagina's), Witboek (19 pagina's), Beschrijving (1 pagina's), Product Bulletin (6 pagina's), Kennisgeving (4 pagina's), Gegevensblad (9 pagina's), Gegevensblad (18 pagina's), Witboek (18 pagina's), Configuratiehandleiding (8 pagina's), Installatie Opmerking (28 pagina's), Handleiding voor probleemoplossing (11 pagina's), Gebruikershandleiding (17 pagina's), Installatie Opmerking (24 pagina's), Handmatig (19 pagina's), Installatie Opmerking (36 pagina's)

Catalyst 6500 Series Supervisor Engine 1A DRAM

Upgrade Installation Note

Part Number: MEM-S1-128MB=

The MEM-S1-128MB= memory upgrade kit consists of 2 64-MB dynamic random-access memory

(DRAM) dual inline memory modules (DIMMs). The memory upgrade kit upgrades the total supervisor

engine memory from 64 MB (2 32-MB DIMMs) to 128 MB (2 64-MB DIMMs).

This publication describes how to remove and install the DRAM DIMMs on the following Catalyst 6500

series supervisor engines:

WS-X6K-S1A-MSFC2

•

WS-X6K-SUP1A-PFC

•

WS-X6K-SUP1A-2GE

•

The WS-X6K-SUP1A-2GE shipped since June 2004 has 128 MB installed as default. Enter the

Note

show version mod command to display the total DRAM installed on the supervisor engine.

WS-X6K-SUP1A-MSFC—See the following Note statements for information about the

•

MEM-S1-128MB-UPG= upgrade kit for the WS-X6K-SUP1A-MSFC.

With the exception of WS-X6K-SUP1A-MSFC, all other Supervisor Engine 1A modules can upgrade to

Note

128-MB DRAM using the MEM-S1-128MB= upgrade kit. To upgrade to 128-MB DRAM on the

WS-X6K-SUP1A-MSFC, use the MEM-S1-128MB-UPG= upgrade kit which also includes an MSFC2

upgrade.

Corporate Headquarters:

Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA