Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion Nota di installazione

Sfoglia online o scarica il pdf Nota di installazione per Hardware di rete Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion. Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion 18. Distributed forwarding card 4 for ws-x68xx, ws-x69xx, and select ws-x67xx modules
Anche per Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion: Nota di installazione (14 pagine), Manuale di soluzione (17 pagine), Nota di installazione (46 pagine), White Paper (19 pagine), Descrizione (1 pagine), Bollettino dei prodotti (6 pagine), Avviso (4 pagine), Scheda tecnica (9 pagine), Scheda tecnica (18 pagine), White Paper (18 pagine), Manuale di configurazione (8 pagine), Nota di installazione (28 pagine), Manuale di risoluzione dei problemi (11 pagine), Manuale d'uso (17 pagine), Nota di installazione (24 pagine), Manuale (19 pagine), Nota di installazione (36 pagine)

Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion Nota di installazione
Catalyst 6500 Series Supervisor Engine 1A DRAM
Upgrade Installation Note
Part Number: MEM-S1-128MB=
The MEM-S1-128MB= memory upgrade kit consists of 2 64-MB dynamic random-access memory
(DRAM) dual inline memory modules (DIMMs). The memory upgrade kit upgrades the total supervisor
engine memory from 64 MB (2 32-MB DIMMs) to 128 MB (2 64-MB DIMMs).
This publication describes how to remove and install the DRAM DIMMs on the following Catalyst 6500
series supervisor engines:
WS-X6K-S1A-MSFC2
WS-X6K-SUP1A-PFC
WS-X6K-SUP1A-2GE
The WS-X6K-SUP1A-2GE shipped since June 2004 has 128 MB installed as default. Enter the
Note
show version mod command to display the total DRAM installed on the supervisor engine.
WS-X6K-SUP1A-MSFC—See the following Note statements for information about the
MEM-S1-128MB-UPG= upgrade kit for the WS-X6K-SUP1A-MSFC.
With the exception of WS-X6K-SUP1A-MSFC, all other Supervisor Engine 1A modules can upgrade to
Note
128-MB DRAM using the MEM-S1-128MB= upgrade kit. To upgrade to 128-MB DRAM on the
WS-X6K-SUP1A-MSFC, use the MEM-S1-128MB-UPG= upgrade kit which also includes an MSFC2
upgrade.
Corporate Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Copyright © 2003 Cisco Systems, Inc. All rights reserved.