Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion Kurulum Notu

Ağ Donanımı Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion için çevrimiçi göz atın veya pdf Kurulum Notu indirin. Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion 18 sayfaları. Distributed forwarding card 4 for ws-x68xx, ws-x69xx, and select ws-x67xx modules
Ayrıca Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion için: Kurulum Notu (14 sayfalar), Çözüm Kılavuzu (17 sayfalar), Kurulum Notu (46 sayfalar), Beyaz Kitap (19 sayfalar), Açıklama (1 sayfalar), Ürün Bülteni (6 sayfalar), Uyarı (4 sayfalar), Veri Sayfası (9 sayfalar), Veri Sayfası (18 sayfalar), Beyaz Kitap (18 sayfalar), Yapılandırma Kılavuzu (8 sayfalar), Kurulum Notu (28 sayfalar), Sorun Giderme Kılavuzu (11 sayfalar), Kullanıcı Kılavuzu (17 sayfalar), Kurulum Notu (24 sayfalar), Manuel (19 sayfalar), Kurulum Notu (36 sayfalar)

Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion Kurulum Notu
Catalyst 6500 Series Supervisor Engine 1A DRAM
Upgrade Installation Note
Part Number: MEM-S1-128MB=
The MEM-S1-128MB= memory upgrade kit consists of 2 64-MB dynamic random-access memory
(DRAM) dual inline memory modules (DIMMs). The memory upgrade kit upgrades the total supervisor
engine memory from 64 MB (2 32-MB DIMMs) to 128 MB (2 64-MB DIMMs).
This publication describes how to remove and install the DRAM DIMMs on the following Catalyst 6500
series supervisor engines:
WS-X6K-S1A-MSFC2
WS-X6K-SUP1A-PFC
WS-X6K-SUP1A-2GE
The WS-X6K-SUP1A-2GE shipped since June 2004 has 128 MB installed as default. Enter the
Note
show version mod command to display the total DRAM installed on the supervisor engine.
WS-X6K-SUP1A-MSFC—See the following Note statements for information about the
MEM-S1-128MB-UPG= upgrade kit for the WS-X6K-SUP1A-MSFC.
With the exception of WS-X6K-SUP1A-MSFC, all other Supervisor Engine 1A modules can upgrade to
Note
128-MB DRAM using the MEM-S1-128MB= upgrade kit. To upgrade to 128-MB DRAM on the
WS-X6K-SUP1A-MSFC, use the MEM-S1-128MB-UPG= upgrade kit which also includes an MSFC2
upgrade.
Corporate Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Copyright © 2003 Cisco Systems, Inc. All rights reserved.