Argo DRY NATURE 13 Gebruiksaanwijzing - Pagina 10
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Argo DRY NATURE 13. Argo DRY NATURE 13 12 pagina's.
Pagina afdrukken
MAINTENANCE OF THE HUMIDIFIER'S EXTERIOR SURFACE
Warning
Always pull the dehumidifier's plug out of the power socket before cleaning it, to prevent electric
shock and malfunction.
Warning
Do not wet the appliance or immerse it in water, otherwise electric shocks may occur.
Use a damp and soft cloth to clean the exterior surface of the dehumidifier.
Do not use solvents, petrol, xylene, talcum powder or brushes to clean the unit: these may damage
the surface or colour of the casing.
We advise removing the tank once every few weeks to prevent mould and bacteria forming on it. Fill the tank with clean
water a small amount of detergent; swill the water around in it, then it out and rinse it thoroughly.
V 01/19
CLEANING AND MAINTENANCE
CLEANING THE WATER TANK
CLEANING THE AIR FILTER
WARNING!
Unplug the unit before start cleaning the air filter.
The filter is designed to remove dust or dirt from the air.
If the filter is clogged by dust, electricity consumption will be
higher than normal.
Cleaning instructions:
1.
2.
3.
Do not use the dehumidifier without the filter as dust may affect
the efficiency of the evaporator, resulting in higher energy
consumption.
Remove the filter by pulling down the grid to complete
extraction. Clean the filter washing it with warm soapy
water.
DO NOT USE ALCOHOL, BENZENE OR OTHER
AGGRESSIVE PRODUCTS TO CLEAN THE FILTER.
Leave the filter to dry naturally, then reposition it in its
slot.
Reinsert the filter into the grid.
Reposition the grid.
22