Cisco ASA 5506W-X Installatiehandleiding - Pagina 37

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Cisco ASA 5506W-X. Cisco ASA 5506W-X 46 pagina's. Threat defense reimage guide
Ook voor Cisco ASA 5506W-X: Snelstarthandleiding (10 pagina's), Configuratiehandleiding (13 pagina's), Snelstarthandleiding (14 pagina's), Eenvoudige installatiehandleiding (11 pagina's), Software Handleiding (37 pagina's), Monteren en aansluiten (12 pagina's), Het chassis monteren (10 pagina's)

Connect to the Console Port

The serial ports provide administrative access to the ASA either with a console terminal or a PC. To configure

the ASA through the CLI, you must establish a connection between the ASA console port and either a terminal

or a PC.

•

You must install a USB device driver the first time a Microsoft Windows-based PC is connected to the USB

serial port on the ASA, otherwise the connection fails.

To uninstall the driver, use the Add Remove Programs utility or the Setup-exe program.

Note

Disconnect the ASA console terminal before uninstalling the driver.

Step 1

Obtain the appropriate driver (Cisco_usbconsole_driver_X_X_zip, where X is a revision number) for your ASA model

from the Cisco

Download Software

Step 2

Install the driver.

Step 3

Connect a USB 5-pin Mini USB Type B to the USB console port as shown in the following figure.

Online Only

Connect to the Console Port with Microsoft Windows, on page 33

Connect to the Console Port with Mac OS X, on page 36

Connect to the Console Port with Linux, on page 36

site, USB Console Software category.

Cisco ASA 5506-X, ASA 5506W-X, and ASA 5506H-X Hardware Installation Guide

C H A P T E R