Sony MHC-W77AV Gebruiksaanwijzing - Pagina 24
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Sony MHC-W77AV. Sony MHC-W77AV 33 pagina's.
Pagina afdrukken
24
2 continued
Press FUNCTION repeatedly until
"VIDEO" appears in the display.
The sound from the video equipment
comes through the speakers. You can also
record the sound from the video
equipment.
Connecting Two or More
Pieces of Video Equipment
at the Same Time
Use an audio connecting cable and make
sure to connect the plugs to jacks of the
same color.
LD Player
etc.
rear panel
ls
Connect video equipment to the TV.
For
more details concerning the connections,
refer to the operation manuals of the video
and the TV.
Connect
With
AUDIO OUT jacks of
© VIDEO/MD
IN
the TV
jacks
Select the input source for the desired
equipment using the TV's input selector.
Then press FUNCTION repeatedly until
"VIDEO" appears in the display.
The sound from the video equipment
comes through the speakers. You can also
record the sound from the video
equipment.
Saeeee
a
Enjoying Dolby Pro
Logic Surround
Effects
To make the Dolby Pro Logic Surround
effects work, vou need to use video tapes or
Laser discs ete. that carry the Dolby
"DO Gaia somone)" yy ORR SURFOUME]" Joy,
Toaic
Chapter 6: Dolby Pro Logic Surround
Adjusting the Sound Level
of Speakers
To enjoy Dolby Pro Logic Surround eftects,
adjust the volume levels of the front, center
and rear speakers by using the test tone.
1 Press and hold down DOLBY PRO
LOGIC for more than a second.
2 Tum the JOG dial to choose the Dolby
Pro Logic Surround mode you want.
The display changes as follows:
NORMAL++3CH LOGIC
[ete
aro
For details on each mode, see "Dolby
Pro Logic Surround Modes" of this
chapter.
3 Press ENTER/NEXT.
4 Press DOLBY PRO LOGIC
(or PRO
LOGIC ON/OFF on the remote) .
5 tum VOLUME (or press VOLUME
{+/-) on the remote) so that the volume
for the front speakers is set to your
normal listening volume.
6 Press TEST TONE on the remote.
The
test tone is automatically output from
each speaker in the sequence shown
below.
NORMAL
mode
-—+Front left ———+Center
Rear+———— Front dane
3ch LOGIC mode
meee
left
-Center
Front right-———___
PHANTOM
mode
Front+« Rear
7 while sitting in your normal listening
position, adjust the volume using
CENTER LEVEL +/- and REAR LEVEL
+/-on the remote so that the volume
level of each speaker is at the same level.
(When you turn VOLUME (or press
VOLUME (+/-—) on the remote), the
volume changes for all speakers.)
8 After you have finished making all
adjustments, press TEST TONE to shut
off the test tone.
Enjoying Dolby Pro Logic
Surround Effects
SYSTEM
POWER > ON
3 | cei' EOO
eee
(CY)
1 Press DOLBY PRO LOGIC (or press
PRO LOGIC ON/OFF on the remote).
To turn off Dolby Pro Logic Surround
Press DOLBY PRO LOGIC (or PRO LOGIC
ON/OFF on the remote).
Notes
¢ Turn off Dolby Pro Logic Surround when
recording.
¢ The audio emphasis will be cancelled
automatically when you turn on the
Dolby Pro Logic Surround.