Sony STR-DA2800ES Activeringshandleiding

Blader online of download pdf Activeringshandleiding voor {categorie_naam} Sony STR-DA2800ES. Sony STR-DA2800ES 7 pagina's. Control4 automation
Ook voor Sony STR-DA2800ES: Beperkte garantie (1 pagina's), Handleiding voor snelle installatie (2 pagina's), Handleiding voor snelle installatie (2 pagina's)

Pagina afdrukken

Sony®

STR-DA2800ES/

DA5800ES Receiver

Control4® Automation

Activation Guide

Supported Models/License

ZSO-STRDA2800ES-C4 2800ES Receiver with

ZSO-STRDA2800ES

ZSO-STRDA5800ES-C4 5800ES Receiver with

ZSO-STRDA5800ES

C4-SO-STR-Activate-E

CAUTION!

Before you activate your Sony STR

receiver to enable full Control4® Automation,

read the Sony instruction and installation

manuals in the receiver's box and the quick

setup and safety instructions at www.control4.

com in the Product pages to install the Sony

receiver. Search for the Sony STR-DA2800ES

or STR-DA5800ES products.

Sony instruction manuals, marketing materials,

protocol manuals, training materials, etc., are

also available on the Control4 website.

CAUTION!

Before installing the Control4

Activation License or using the receiver,

perform a Sony software update. To update

go to the following UI page: Home > Settings

> Network Update. The update may take up to

15 minutes—please be patient.

™

Control4® Activation

License

2800ES Receiver

Control4 Activation License

5800ES Receiver

Control4 Activation

License (for Sony STR)

Introduction

This document describes how to set up a Sony STR

receiver as a Control4 controller in a Control4 system.

The Sony STR-DA2800ES and DA5800ES receivers

with full Control4 Automation activated result in an

unmatched home entertainment experience, for both

basic, universal remote and high-end installations.

To unlock the full automation capability of the

receivers, a Control4 Activation License (C4-SO-STR-

Activate-E) is required.

When combined with a Control4 Activation License,

the receiver can be used as a Primary Controller

running Director in a small, one-room home-

automation project, or as a Secondary Controller

not running Director in a multi-controller Control4

system.

Whether configured as a Primary or a Secondary

Controller, when activated, the receiver's display

will switch to the Control4 On-Screen Navigator.

Furthermore, most of the functionality of a Control4

controller can be configured using Composer Pro*.

A 'receiver only' product is also available (see

"Configure as Receiver Only" later in this document).

Control4® System Requirements

Receiver with Full Automation Activated (ZSO-

STRDA2800ES-C4 or ZSO-STRDA5800ES-C4):

• Control4 Composer Pro software (OS 2.2.4 or

later).

• Control4 Activation License assigned to the

customer's my.control4.com account.

• USB ZigBee Wireless Adapter (also known as a

'ZigBee dongle' - UWA-C4Z, included).

• Integrated receiver with Control4 automation.

For a list of limitations, see the "Control4 Activation

Instructions" section in this document.