Sony STR-DA2800ES Руководство по активации
Просмотреть онлайн или скачать pdf Руководство по активации для Стереосистема Sony STR-DA2800ES. Sony STR-DA2800ES 7 страниц. Control4 automation
Также для Sony STR-DA2800ES: Ограниченная гарантия (1 страниц), Руководство по быстрой настройке (2 страниц), Руководство по быстрой настройке (2 страниц)
Печатать страницу
Sony®
STR-DA2800ES/
DA5800ES Receiver
Control4® Automation
Activation Guide
Supported Models/License
ZSO-STRDA2800ES-C4 2800ES Receiver with
ZSO-STRDA2800ES
ZSO-STRDA5800ES-C4 5800ES Receiver with
ZSO-STRDA5800ES
C4-SO-STR-Activate-E
CAUTION!
Before you activate your Sony STR
receiver to enable full Control4® Automation,
read the Sony instruction and installation
manuals in the receiver's box and the quick
setup and safety instructions at www.control4.
com in the Product pages to install the Sony
receiver. Search for the Sony STR-DA2800ES
or STR-DA5800ES products.
Sony instruction manuals, marketing materials,
protocol manuals, training materials, etc., are
also available on the Control4 website.
CAUTION!
Before installing the Control4
Activation License or using the receiver,
perform a Sony software update. To update
go to the following UI page: Home > Settings
> Network Update. The update may take up to
15 minutes—please be patient.
™
Control4® Activation
License
2800ES Receiver
Control4 Activation License
5800ES Receiver
Control4 Activation
License (for Sony STR)
Introduction
This document describes how to set up a Sony STR
receiver as a Control4 controller in a Control4 system.
The Sony STR-DA2800ES and DA5800ES receivers
with full Control4 Automation activated result in an
unmatched home entertainment experience, for both
basic, universal remote and high-end installations.
To unlock the full automation capability of the
receivers, a Control4 Activation License (C4-SO-STR-
Activate-E) is required.
When combined with a Control4 Activation License,
the receiver can be used as a Primary Controller
running Director in a small, one-room home-
automation project, or as a Secondary Controller
not running Director in a multi-controller Control4
system.
Whether configured as a Primary or a Secondary
Controller, when activated, the receiver's display
will switch to the Control4 On-Screen Navigator.
Furthermore, most of the functionality of a Control4
controller can be configured using Composer Pro*.
A 'receiver only' product is also available (see
"Configure as Receiver Only" later in this document).
Control4® System Requirements
Receiver with Full Automation Activated (ZSO-
STRDA2800ES-C4 or ZSO-STRDA5800ES-C4):
• Control4 Composer Pro software (OS 2.2.4 or
later).
• Control4 Activation License assigned to the
customer's my.control4.com account.
• USB ZigBee Wireless Adapter (also known as a
'ZigBee dongle' - UWA-C4Z, included).
• Integrated receiver with Control4 automation.
*
For a list of limitations, see the "Control4 Activation
Instructions" section in this document.
1