Cisco ASA 5585-X Onderhoudshandleiding - Pagina 11

Blader online of download pdf Onderhoudshandleiding voor {categorie_naam} Cisco ASA 5585-X. Cisco ASA 5585-X 44 pagina's. Maintenance and upgrade procedures
Ook voor Cisco ASA 5585-X: Snelstarthandleiding (40 pagina's), Snelstarthandleiding (6 pagina's)

Pagina afdrukken
Cisco ASA 5585-X Onderhoudshandleiding
Chapter 4
Maintenance and Upgrade Procedures
Figure 4-9
Remove the optical port plug, and then connect one end of an LC cable to the SFP/SFP+ transceiver
Step 10
module
Figure 4-10
Connect the other end of the LC cable to a network device, such as a router or a switch.
Step 11
After connecting all necessary cables, power on the security appliance.
Step 12
Verify that the PWR indicator on the front panel is green.
Step 13
Removing and Installing the Power Supply Module
This section describes how to remove and install power supply modules in the ASA 5585-X, and
includes the following topics:
•
•
•
•
•
OL-22567-02
Installing the SFP/SFP+ Transceiver
(Figure
4-10).
Connecting the LC Cable
AC/DC Power Supply Module Configurations, page 4-12
AC Power Supply Module, page 4-12
Removing and Installing an AC Power Supply Module, page 4-13
DC Power Supply Module, page 4-16
Installing the DC Power Supply Module, page 4-17
Cisco ASA 5585-X Adaptive Security Appliance Hardware Installation Guide
Removing and Installing the Power Supply Module
4-11