Cisco ASR 9000 Series Handmatig - Pagina 16

Blader online of download pdf Handmatig voor {categorie_naam} Cisco ASR 9000 Series. Cisco ASR 9000 Series 24 pagina's. Line card
Ook voor Cisco ASR 9000 Series: Netwerkinstellingen configureren (26 pagina's), Configuratiehandleiding (46 pagina's), Configuratiehandleiding (50 pagina's), configureren (46 pagina's), Handmatig (44 pagina's), Snelle referentiehandleiding (7 pagina's)

Pagina afdrukken

show controllers backplane ethernet location detail

To display detailed information about the backplane interfaces in a particular location, use the show controllers

backplane ethernet location detail command in EXEC mode.

show controllers backplane ethernet location node-id detail

Syntax Description

This command has no keywords or arguments.

Command Modes

EXEC

Command History

Release

Release 3.7.2

Usage Guidelines

Examples

The following example shows the output from the show controllers backplane ethernet location detail

command:

RP/0/RSP0/CPU0:router# show controllers backplane ethernet location 0/1/0 detail

FastEthernet0_1_0 is up

Hardware is 10/100 Ethernet, H/W address is 5246.4800.0010

Internet address is 10.0.0.16

MTU 1514 bytes

Encapsulation HFRIES (HFR Internal Ethernet Server)

Mode : Full Duplex,

Table 7: show controllers backplane ethernet location detail Field Descriptions

Field

Hardware

Internet address

MTU

Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference

Rate : 100Mb/s

426422 packets input, 0 bytes, 1 total input drops

14170 packets discarded (935122 bytes) in garbage collection

16 packets discarded (5344 bytes) in recv processing

Received 0 broadcast packets, 0 multicast packets

Input errors: 0 CRC, 0 overrun, 0 alignment, 0 length, 0 collision

440272 packets output, 0 bytes, 0 total output drops

Output 0 broadcast packets, 0 multicast packets

Output errors: 0 underruns, 0 aborts, 0 loss of carrier

Internal Ethernet Control Network Commands on the Cisco ASR 9000 Series Router

Modification

This command was introduced.

Description

Provides the hardware type, followed by the hardware

address.

IP address of the interface.

Maximum packet size, in bytes, that a particular

interface can handle.

OL-24762-01