show controllers backplane ethernet location detail
show controllers backplane ethernet location detail
To display detailed information about the backplane interfaces in a particular location, use the show controllers
backplane ethernet location detail command in EXEC mode.
show controllers backplane ethernet location node-id detail
Syntax Description
This command has no keywords or arguments.
Command Modes
EXEC
Command History
Release
Release 3.7.2
Usage Guidelines
Examples
The following example shows the output from the show controllers backplane ethernet location detail
command:
RP/0/RSP0/CPU0:router# show controllers backplane ethernet location 0/1/0 detail
FastEthernet0_1_0 is up
Hardware is 10/100 Ethernet, H/W address is 5246.4800.0010
Internet address is 10.0.0.16
MTU 1514 bytes
Encapsulation HFRIES (HFR Internal Ethernet Server)
Mode : Full Duplex,
Table 7: show controllers backplane ethernet location detail Field Descriptions
Field
Hardware
Internet address
MTU
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference
16
Rate : 100Mb/s
426422 packets input, 0 bytes, 1 total input drops
14170 packets discarded (935122 bytes) in garbage collection
16 packets discarded (5344 bytes) in recv processing
Received 0 broadcast packets, 0 multicast packets
Input errors: 0 CRC, 0 overrun, 0 alignment, 0 length, 0 collision
440272 packets output, 0 bytes, 0 total output drops
Output 0 broadcast packets, 0 multicast packets
Output errors: 0 underruns, 0 aborts, 0 loss of carrier
Internal Ethernet Control Network Commands on the Cisco ASR 9000 Series Router
Modification
This command was introduced.
Description
Provides the hardware type, followed by the hardware
address.
IP address of the interface.
Maximum packet size, in bytes, that a particular
interface can handle.
OL-24762-01
Печатать страницу