Digitone ProSeries II Call Blocker Bedieningshandleiding - Pagina 8
Blader online of download pdf Bedieningshandleiding voor {categorie_naam} Digitone ProSeries II Call Blocker. Digitone ProSeries II Call Blocker 17 pagina's. Automatically blocks and routes screened calls using caller id with back lighted display
Pagina afdrukken
Viewing Caller Lists and Stored Number Removal
You can review what numbers are stored in each caller list by entering programming:
1) (Preferred) Take the Phone in the TEL port off-hook, Dial ## or *** to go
directly into programming or,
2) press and hold the Program Button for 3 seconds until you see Program Mode,
then Pick Up Phone, when the prompt for Enter Code displays enter:
Code 21 to view Spoofed Exchange Call list
Code 41 to view Blocked Caller list
Code 43 to view Blocked Outgoing Dialed Numbers
Code 44 to view Blocked Names list
Code 51 to view Invited Caller list
Code 53 to view Invited Caller in a Blocked Area Code
Code 61 to view VIP Caller list
For each list, use the arrow buttons to view up or down. To remove any stored entry
press the Delete Entry button the Display will ask "Confirm Delete?" Press the
Delete Entry button again to confirm. The number or name will then be removed from
that list.
Blocking Known Unwanted Callers Code 40
Known unwanted callers (Non Auto Del Nbrs) are those you enter through programming
Code 40 and won't be accidentally erased when clearing the memory of blocked
numbers. To Block known unwanted individual callers, press and hold the Program
Button for 3 seconds until you see "Program Mode", then "Pick Up Phone", when the
prompt for "Enter Code" displays enter 40 (to store a number of your Blocked caller)
followed by the 10 digit number, then the * key. Example for a Blocked number enter:
40, 894 555 1212 *, display shows function.
numbers.
Blocking Known Unwanted Area Codes Code 40
To Block specific unwanted area codes, press and hold the Program Button for 3
seconds until you see "Program Mode", then "Pick Up Phone", when the prompt for
"Enter Code" displays, enter 40 to store an area code followed by the * key. Ex. for a
Blocked area code enter: 40, 894*. Area codes are displayed as just the area code.
Store up to 800 unwanted area codes.
Deleting Code 40 Blocked Numbers Code 40
"Can Not Delete" will display on numbers stored using Code 40 when reviewing Code
41 entries.
To delete a single number you have stored using Code 40, enter
programming: press and hold the Program Button for 3 seconds until you see
"Program Mode", then "Pick Up Phone", when the prompt for "Enter Code" displays
enter 98, then enter the phone number you want to delete followed by the * key.
Finding Numbers in Blocked Numbers List Code 40
To FIND a number in the large blocked memory storage, use Code 40 ### then the
number followed by * to locate that number in the list. EX: 40### then 894 555
1212 *. If the number is found, it will display its location in memory on the LCD screen.
If not, then NBR NOT FOUND will display.
Store up to 800 unwanted caller
7