Digitone ProSeries II Call Blocker Посібник з експлуатації - Сторінка 8

Переглянути онлайн або завантажити pdf Посібник з експлуатації для Аксесуари для телефонів Digitone ProSeries II Call Blocker. Digitone ProSeries II Call Blocker 17 сторінок. Automatically blocks and routes screened calls using caller id with back lighted display

Друкувати сторінку

Digitone ProSeries II Call Blocker Посібник з експлуатації

1. Index of Codes

Viewing Caller Lists and Stored Number Removal

You can review what numbers are stored in each caller list by entering programming:

1) (Preferred) Take the Phone in the TEL port off-hook, Dial ## or *** to go

directly into programming or,

2) press and hold the Program Button for 3 seconds until you see Program Mode,

then Pick Up Phone, when the prompt for Enter Code displays enter:

Code 21 to view Spoofed Exchange Call list

Code 41 to view Blocked Caller list

Code 43 to view Blocked Outgoing Dialed Numbers

Code 44 to view Blocked Names list

Code 51 to view Invited Caller list

Code 53 to view Invited Caller in a Blocked Area Code

Code 61 to view VIP Caller list

For each list, use the arrow buttons to view up or down. To remove any stored entry

press the Delete Entry button the Display will ask "Confirm Delete?" Press the

Delete Entry button again to confirm. The number or name will then be removed from

that list.

Blocking Known Unwanted Callers Code 40

Known unwanted callers (Non Auto Del Nbrs) are those you enter through programming

Code 40 and won't be accidentally erased when clearing the memory of blocked

numbers. To Block known unwanted individual callers, press and hold the Program

Button for 3 seconds until you see "Program Mode", then "Pick Up Phone", when the

prompt for "Enter Code" displays enter 40 (to store a number of your Blocked caller)

followed by the 10 digit number, then the * key. Example for a Blocked number enter:

40, 894 555 1212 *, display shows function.

numbers.

Blocking Known Unwanted Area Codes Code 40

To Block specific unwanted area codes, press and hold the Program Button for 3

seconds until you see "Program Mode", then "Pick Up Phone", when the prompt for

"Enter Code" displays, enter 40 to store an area code followed by the * key. Ex. for a

Blocked area code enter: 40, 894*. Area codes are displayed as just the area code.

Store up to 800 unwanted area codes.

Deleting Code 40 Blocked Numbers Code 40

"Can Not Delete" will display on numbers stored using Code 40 when reviewing Code

41 entries.

To delete a single number you have stored using Code 40, enter

programming: press and hold the Program Button for 3 seconds until you see

"Program Mode", then "Pick Up Phone", when the prompt for "Enter Code" displays

enter 98, then enter the phone number you want to delete followed by the * key.

Finding Numbers in Blocked Numbers List Code 40

To FIND a number in the large blocked memory storage, use Code 40 ### then the

number followed by * to locate that number in the list. EX: 40### then 894 555

1212 *. If the number is found, it will display its location in memory on the LCD screen.

If not, then NBR NOT FOUND will display.

Store up to 800 unwanted caller