Digitone ProSeries II Call Blocker Посібник з експлуатації - Сторінка 10
Переглянути онлайн або завантажити pdf Посібник з експлуатації для Аксесуари для телефонів Digitone ProSeries II Call Blocker. Digitone ProSeries II Call Blocker 17 сторінок. Automatically blocks and routes screened calls using caller id with back lighted display
Друкувати сторінку
Inviting Area Codes Code 50
You can program in specific Invited area codes using the Program Button on the front
panel. To enable this feature, press and hold the Program Button for 3 seconds until
you see "Program Mode", then "Pick Up Phone", when the prompt for "Enter Code"
displays enter 50 to store an area code followed by the # key 7 times, then the * key.
The # key is used as a wildcard replacement for any number. Example for Invited area
codes enter: 50, 894 ### #### *, display shows function.
Inviting Callers within a Blocked Area Code Code 52
Invited callers within a blocked area code can only be added using programming Code
52, and not by using the Invite button. To Invite a number within a blocked area code,
press and hold the Program Button for 3 seconds until you see "Program Mode", then
"Pick Up Phone", when the prompt for "Enter Code" displays enter 52 to store a full 10
digit number followed by the * key. Example: 52, 894 555 1212 *, display shows
function. Store up to 50 numbers within one or more area codes.
Block Out of Area Name Code 58
The DPCB can block the name Out of Area with or without a phone number. Scammers
can get through by adding a spoofed number, even your own, when calling in Out of
Area. However, the DPCB will block these calls that display the name as Out of Area
with or without a phone number. To enable this mode, press and hold the Program
Button for 3 seconds until you see "Program Mode", then "Pick Up Phone", when the
prompt for "Enter Code" displays enter 58, display shows function. To return to the
default mode when the prompt for "Enter Code" displays, enter 59.
Inviting VIP Callers Code 60
You can program in specific VIP callers like family, friends and business associates, who
can ring through at any time by using the Program Button on the front panel. To
enable this feature, press and hold the Program Button for 3 seconds until you see
"Program Mode", then "Pick Up Phone", when the prompt for "Enter Code" displays
enter 60 to store a full number followed by the * key.
Example for a VIP number
enter: 60, 894 555 1212 * or for a VIP area code enter: 60, 894 ### #### *, display
shows function. Store up to 80 numbers or area codes.
First Ring Suppression™ (70) – Set ON to prevent blocked calls from ringing
connected phones in the TEL port. Caller ID is repeated to the TEL port when valid or
Invited calls are passed through. Note: Extension phones connected directly to the
phone service will ring once on blocked calls.
Digitone recommends using a
Cordless phone system with multiple handsets connected to the TEL port to
distribute ringing throughout your home where you may have older wired corded
phones permanently connected. You would then turn off the corded phone ringers so
that the cordless system could do the ring announcements.
Out of Area, Private and X "Unknown" OPX Code 72
If you want to have an answer machine or your voice mail to take these types of calls
and not ring your phone connected to the DPCB you can program in Code 72 (OPX
override). Note that Code 72 allows the OPX calls through to the Line only, not the TEL
phone port. To enable OPX Override, enter programming: press and hold the Program
Button for 3 seconds until you see "Program Mode", then "Pick Up Phone", when the
9