Digitrax BDL16 Installatie-informatie - Pagina 7

Blader online of download pdf Installatie-informatie voor {categorie_naam} Digitrax BDL16. Digitrax BDL16 10 pagina's. Loconet occupancy detector with rx4

Pagina afdrukken

Figure 3: Reverse Section Wiring

PS12

12 VAC

LocoNet

Power

to other LocoNet

Devices such as

Supply

(Throttles, Boosters,

UP3's Etc.)

External LED

Connectors (pin 1)

See Fig. 4

All 4 Detection Sections

in this zone can only be

used in this

reverse section

These 2 wires come

from a reversing device

such as a PM4 Reverse

Section, a separate

auto-reversing booster,

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22

a DPDT toggle switch,

or other reversing

device.

Reverse

Section

Using 4

Detection Sections

Option LED (red)

ID LED (green)

AUX1

BDL16

Top View

AUX2

TOP ROW

Booster Ground to pin 11

Zone Common

For non-reversing Detection

Sections

Detection Common

For non-reversing

Detection Sections

Non-reversing

part of layout

8.0 Auto-Reversing

Note that an auto-reverse section can only use detection sections that are con-

tained in a BDL16 zone that is correctly set up for auto-reversing , see Figure

3: Reverse Section Wiring for a wiring example.

9.0 LED Occupancy Indicators

9.1 LT5 Tester

Each BDL16 comes with an LT5 that will help you with layout wiring and

troubleshooting for transponding & detection with Digitrax BDL16 LocoNet

Occupancy Detector. The LT5 plugs onto the LED Connections of BDL16 and

the LEDS on the LT5 light when detection sections are occupied. The status of

power to each zone is also shown.

LT5 Tester

LED for First Detection Section (1,5,9, or 13)

LED for Second Detection Section (2,6, 0, or 14)

LED for Third Detection Section (3,7,11, or 15)

LED for Fourth Detection Section (4,8,12, or 16)

LED for Power Zone (A, B, C, or D)

Socket

LocoNet

Connectors

LT5 Tester

Plug LT5 Tester in to External LED Connectors A,B,C, or D

with LED's facing the edge of the BDL16 as shown.

BDL16 (Partial Top View)

9.2 Panel Indicator Wiring

For a front panel display of status with user supplied LED's, connect to the

four 0.1" 2x5 headers, and wire up LEDs as shown in Figure 4: LED Panel

Indicators Wiring. DigiKey (1-800-DigiKey) part number M1AXA-1036R-

ND is a convenient plug and cable assembly that you can use to wire LED

indicators. Header "A" includes the 4 detection indicators for detection sec-

tions 1 to 4 and the zone power indicator for zone A that includes these four

External LED

DS 8

Connectors

DS 7

DS 6

DS 5

Zone B

DS 4

DS 3

DS 2

DS 1

Zone A