Cisco SCE 1000 and Snelstarthandleiding - Pagina 12
Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Cisco SCE 1000 and. Cisco SCE 1000 and 49 pagina's. Service control engine 1000 2xgbe
Pagina afdrukken
Connect the AC-Input Power Supply Unit
Plug the AC-input power cable into the AC-input power receptacle on the AC-input power supply
Step 1
For AC-input power, we recommend powering the SCE 2000 platform from a 120 VAC, 15A receptacle U.S. (240 VAC,
10A international) at the power source.
Figure 13
Connecting the AC Power
BY PA SS
1
IN
PO W ER B
OK
IN
Plug the AC power supply cable into the AC power source.
Step 2
Step 3
Turn the on/off switch to the on position.
Look at the IN and OK LEDs on the power supply unit and the corresponding Power LED on the front panel. If the
Step 4
AC-input power supply unit is operating properly, these LEDs will be glowing green.
Ensure that the power supply is properly aligned and the installation screw is tightened.
Step 5
12
PO W ER A
OK