Cisco UCS B200 M3 Installatie en onderhoud - Pagina 6
Blader online of download pdf Installatie en onderhoud voor {categorie_naam} Cisco UCS B200 M3. Cisco UCS B200 M3 28 pagina's. Blade server
Ook voor Cisco UCS B200 M3: Installatiehandleiding (34 pagina's), Installatie en onderhoud (36 pagina's), Installatie en onderhoud (37 pagina's), Handmatig (8 pagina's), Upgrade handleiding (21 pagina's)
Procedure
Step 1
Place the drive ejector into the open position by pushing the release button.
Figure 4: Installing a Hard Drive in a Blade Server
Step 2
Gently slide the drive into the opening in the blade server until it seats into place.
Step 3
Push the drive ejector into the closed position.
You can use Cisco UCS Manager to format and configure RAID services. For details, see the Configuration Guide for
the version of Cisco UCS Manager that you are using. The configuration guides are available at the following URL:
http://www.cisco.com/en/US/products/ps10281/products_installation_and_configuration_guides_list.html
If you need to move a RAID cluster, see the
Blade Server Removal and Installation
Before performing any internal operations on this blade server, you must remove it from the chassis.
Caution
To prevent ESD damage, wear grounding wrist straps during these procedures and handle modules by the carrier edges only.
Powering Off a Blade Server Using the Power Button
Note
The front panel power button is disabled by default to ensure that servers are decommissioned through the UCS Manager
software before shutdown. If you prefer to shut down the server locally with the button, you can enable front power-button
control in UCS Manager.
Tip
You can also shut down servers remotely using Cisco UCS Manager. For details, see the Configuration Guide for the version
of Cisco UCS Manager that you are using. The configuration guides are available at the following URL:
http://www.cisco.com/en/US/products/ps10281/products_installation_and_configuration_guides_list.html
6
Cisco UCS Manager Troubleshooting Reference
Guide.