Cisco AS5300 - Universal Access Server Snelstarthandleiding - Pagina 10
Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Cisco AS5300 - Universal Access Server. Cisco AS5300 - Universal Access Server 25 pagina's. Access server
Ook voor Cisco AS5300 - Universal Access Server: Bijlage (10 pagina's), Configuratiehandleiding (46 pagina's), Handmatig (21 pagina's)
Pagina afdrukken
Connect the Serial Port for WAN Access
Use a serial 12-in-1 cable (DTE if connecting to a DSU or DCE if connecting to a CSU) to connect one of the four synchronous
serial ports on the E1 or T1 PRI cards (with serial support) to a modem or a CSU or DSU. The CSU or DSU provides access to
a WAN.
Connect the serial 12-in-1 cable connector on the serial cable to the serial port on the rear panel of the Cisco AS5300.
Step 1
Connect the EIA/TIA-232, EIA/TIA-449, EIA/TIA-530A, EIA-530, V.35, or X.21 connector to the CSU or DSU.
Step 2
PORT SELECT
RA
A
LB
LA
S A
0
EIA/TIA-232, EIA/TIA-449, EIA/TIA-530A,
10
S A
S A
S
1
A
S A
2
S A
T1
3
S A
S
4
5
6
7
T0
T3
T2
Synchronous serial
port (DB-26)
Serial
transition
cable
EIA-530, V.35 or X.21 connector
ACT OK
RX
TX
Universal access
server
CSU/DSU or
other DCE or DTE
Internet