Cisco AS5300 - Universal Access Server Configuratiehandleiding - Pagina 17
Blader online of download pdf Configuratiehandleiding voor {categorie_naam} Cisco AS5300 - Universal Access Server. Cisco AS5300 - Universal Access Server 46 pagina's. Access server
Ook voor Cisco AS5300 - Universal Access Server: Bijlage (10 pagina's), Snelstarthandleiding (25 pagina's), Handmatig (21 pagina's)
Pagina afdrukken
Chapter 2
Configuring the Cisco AS5300 Network Access Server
Layer 2 Status should be "Multiple_Frame_Established." (It might take several seconds for Layer 2
•
status to appear.)
•
Layer 3 Status should be "No Active Layer 3 Call(s)."
Enter the show isdn service command to determine which channels have active calls and if all the
Step 3
individual channels are in service. In this example, note that there are 8 serial channels under each
D channel that calls cannot use. T1 lines are used in this case study (not E1):
hq-sanjose# show isdn service
PRI Channel Statistics:
ISDN Se0:23, Channel (1-31)
Activated dsl 0
State (0=Idle 1=Propose 2=Busy 3=Reserved 4=Restart 5=Maint)
0 0 2 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 3 3 3 3 3 3 3 3
Channel (1-31) Service (0=Inservice 1=Maint 2=Outofservice)
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 2 2 2 2 2 2 2 2
ISDN Se1:23, Channel (1-31)
Activated dsl 0
State (0=Idle 1=Propose 2=Busy 3=Reserved 4=Restart 5=Maint)
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 3 3 3 3 3 3 3 3
Channel (1-31) Service (0=Inservice 1=Maint 2=Outofservice)
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 2 2 2 2 2 2 2 2
ISDN Se2:23, Channel (1-31)
Activated dsl 0
State (0=Idle 1=Propose 2=Busy 3=Reserved 4=Restart 5=Maint)
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 3 3 3 3 3 3 3 3
Channel (1-31) Service (0=Inservice 1=Maint 2=Outofservice)
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 2 2 2 2 2 2 2 2
ISDN Se3:23, Channel (1-31)
Activated dsl 0
State (0=Idle 1=Propose 2=Busy 3=Reserved 4=Restart 5=Maint)
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 3 3 3 3 3 3 3 3
Channel (1-31) Service (0=Inservice 1=Maint 2=Outofservice)
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 2 2 2 2 2 2 2 2
Enter the show ip interface brief command to view the individual serial B channel interfaces. In the
Step 4
following example, Serial 0:0 through Serial 0:22 are B channels and are associated to D channel
Serial 0:23:
hq-sanjose# show ip interface brief
Interface
Ethernet0
FastEthernet0
Serial0:0
Serial0:1
Serial0:2
Serial0:3
Serial0:4
Serial0:5
Serial0:6
Serial0:7
Serial0:8
Serial0:9
Serial0:10
Serial0:11
Serial0:12
Serial0:13
Serial0:14
Serial0:15
Serial0:16
Serial0:17
Serial0:18
Serial0:19
IP-Address
OK? Method Status
unassigned
YES NVRAM
10.1.1.10
YES manual up
unassigned
YES unset
unassigned
YES unset
unassigned
YES unset
unassigned
YES unset
unassigned
YES unset
unassigned
YES unset
unassigned
YES unset
unassigned
YES unset
unassigned
YES unset
unassigned
YES unset
unassigned
YES unset
unassigned
YES unset
unassigned
YES unset
unassigned
YES unset
unassigned
YES unset
unassigned
YES unset
unassigned
YES unset
unassigned
YES unset
unassigned
YES unset
unassigned
YES unset
Cisco IOS Dial Services Quick Configuration Guide
Task 2—Setting Up Asynchronous Shell Services
Protocol
administratively down down
up
down
down
down
down
down
down
down
down
down
down
down
down
down
down
down
down
down
down
down
down
down
down
down
down
down
down
down
down
down
down
down
down
down
down
down
down
down
down
down
down
2-17