Cisco Firepower 1120 Hardware installatiehandleiding - Pagina 29

Blader online of download pdf Hardware installatiehandleiding voor {categorie_naam} Cisco Firepower 1120. Cisco Firepower 1120 30 pagina's. Connected grid router
Ook voor Cisco Firepower 1120: Installatiehandleiding (6 pagina's), Snelstarthandleiding (10 pagina's), Handmatig (6 pagina's), Hardware installatiehandleiding (42 pagina's), Uitrolhandleiding (8 pagina's), Aan de slag (42 pagina's), Hardware installatiehandleiding (42 pagina's)

Maintenance and Upgrade

•

Replace the SSD

The Firepower 1100 series ships with an SSD installed. You can replace this SSD should it fail. You must

power off the chassis to do replace the SSD.

Caution

You will lose your configuration after you replace the existing SSD with a new SSD.

Follow these steps to replace an SSD in the chassis:

Step 1

Loosen the thumb screws on both sides of the SSD bay and pull the existing SSD out of the bay.

Step 2

Insert the new SSD into the bay and push it in until it is seated.

Figure 9: Remove and Install an SSD

Step 3

Tighten the thumb screws on both sides of the SSD bay.

Replace the SSD , on page 25

C H A P T E R

Cisco Firepower 1100 Series Hardware Installation Guide