Cisco Firepower 1120 Hardware installatiehandleiding - Pagina 25

Blader online of download pdf Hardware installatiehandleiding voor {categorie_naam} Cisco Firepower 1120. Cisco Firepower 1120 30 pagina's. Connected grid router
Ook voor Cisco Firepower 1120: Installatiehandleiding (6 pagina's), Snelstarthandleiding (10 pagina's), Handmatig (6 pagina's), Hardware installatiehandleiding (42 pagina's), Uitrolhandleiding (8 pagina's), Aan de slag (42 pagina's), Hardware installatiehandleiding (42 pagina's)

Connect to the Console Port

•

You must install a USB device driver the first time a Microsoft Windows-based PC is connected to the USB

console port on the chassis, otherwise the connection fails.

To uninstall the driver, use the Add Remove Programs utility or the Setup-exe program.

Note

Disconnect the console terminal before uninstalling the driver.

Step 1

Obtain the appropriate driver (Cisco_usbconsole_driver_X_X_zip, where X is a revision number) for your model from

the Cisco

Download Software

Step 2

Install the driver.

Step 3

Connect a 5-pin USB Mini B to the console port as shown in the following figure.

Connect to the Console Port with Microsoft Windows, on page 21

Connect to the Console Port with Mac OS X, on page 22

Connect to the Console Port with Linux, on page 23

site, USB Console Software category.

C H A P T E R

Cisco Firepower 1100 Series Hardware Installation Guide