Cisco Firepower 1120 Hardware installatiehandleiding - Pagina 26

Blader online of download pdf Hardware installatiehandleiding voor {categorie_naam} Cisco Firepower 1120. Cisco Firepower 1120 30 pagina's. Connected grid router
Ook voor Cisco Firepower 1120: Installatiehandleiding (6 pagina's), Snelstarthandleiding (10 pagina's), Handmatig (6 pagina's), Hardware installatiehandleiding (42 pagina's), Uitrolhandleiding (8 pagina's), Aan de slag (42 pagina's), Hardware installatiehandleiding (42 pagina's)

Connect to the Console Port with Mac OS X

Figure 8: Firepower 1120 and 1140 Console Port Connection

Step 4

Connect the end of the cable with the DB-9 connector (or USB Type A) to the terminal or PC. If your terminal or PC has

a console port that does not accommodate a DB-9 connector, you must provide an appropriate adapter for that port.

The LED for the console port turns green and within a few moments the Found New Hardware Wizard appears.

Step 5

Follow the instructions to complete the driver installation.

Step 6

To communicate with the chassis, start a terminal emulator application. This software should be configured with the

following parameters:

• 9600 baud

• 8 data bits

• no parity

• 1 stop bit

• no flow control

Connect to the Console Port with Mac OS X

Follow these steps to connect a Mac OS X system USB port to the console using the built-in OS X Terminal

utility, or alternatively you can use a separate terminal emulator application.

Step 1

Use the Finder to go to Applications > Utilities > Terminal.

Step 2

Connect the OS X USB port to the chassis.

Step 3

Enter the following commands to find the OS X USB port number:

Cisco Firepower 1100 Series Hardware Installation Guide

USB Mini B console port

USB Type A

USB Mini B to USB Type A console cable

Connect to the Console Port