Cisco Firepower 1120 Hardware Installation Manual - Page 26

Browse online or download pdf Hardware Installation Manual for Server Cisco Firepower 1120. Cisco Firepower 1120 30 pages. Connected grid router
Also for Cisco Firepower 1120: Installation Manual (6 pages), Quick Start Manual (10 pages), Manual (6 pages), Hardware Installation Manual (42 pages), Deployment Manual (8 pages), Getting Started (42 pages), Hardware Installation Manual (42 pages)

Print Page
Cisco Firepower 1120 Hardware Installation Manual

Connect to the Console Port with Mac OS X

Figure 8: Firepower 1120 and 1140 Console Port Connection
1
3
Step 4
Connect the end of the cable with the DB-9 connector (or USB Type A) to the terminal or PC. If your terminal or PC has
a console port that does not accommodate a DB-9 connector, you must provide an appropriate adapter for that port.
The LED for the console port turns green and within a few moments the Found New Hardware Wizard appears.
Step 5
Follow the instructions to complete the driver installation.
Step 6
To communicate with the chassis, start a terminal emulator application. This software should be configured with the
following parameters:
• 9600 baud
• 8 data bits
• no parity
• 1 stop bit
• no flow control
Connect to the Console Port with Mac OS X
Follow these steps to connect a Mac OS X system USB port to the console using the built-in OS X Terminal
utility, or alternatively you can use a separate terminal emulator application.
Step 1
Use the Finder to go to Applications > Utilities > Terminal.
Step 2
Connect the OS X USB port to the chassis.
Step 3
Enter the following commands to find the OS X USB port number:
Cisco Firepower 1100 Series Hardware Installation Guide
22
USB Mini B console port
USB Type A
2
USB Mini B to USB Type A console cable
Connect to the Console Port