Cisco ONS 15454 Installeer - Pagina 15

Blader online of download pdf Installeer voor {categorie_naam} Cisco ONS 15454. Cisco ONS 15454 32 pagina's. Four-shelf and zero-shelf bay assembly
Ook voor Cisco ONS 15454: Handleiding voor installatie-instructies (22 pagina's), Installeer (32 pagina's), Uitpakken en installeren (42 pagina's), Uitpakken en installeren (40 pagina's)

Chapter 1 Install the Shelf and Backplane Cable

Figure 1-3

Insert and tighten three screws to secure the AEP to the backplane.

Step 4

Connect the AEP cable to the backplane and AEP:

Step 5

Connect the 10 colored wires to the wire-wrap pins on the backplane.

cable wires are connected.

Plug the other end of the AEP cable into AEP connector port. The brown pin is on the top.

Figure 1-4

78-18537-01

Installing Standoffs and the AEP

Wires

AEP cable

Connector

Table 1-1

AEP Wire-Wrap Connections to Backplane Pins

NTP- A119 Install the Alarm Expansion Panel

shows AEP and AIC-I signals that each wire carries.

Cisco ONS 15454 Procedure Guide, Release 8.5.1

Figure 1-4

shows where the

1-15