Epson Stylus Scan 2500 Installatiehandleiding - Pagina 29

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Epson Stylus Scan 2500. Epson Stylus Scan 2500 35 pagina's. Epson imaging products (scanners, digital cameras, and stylus scan devices) compatibility chart for macintosh os x classic
Ook voor Epson Stylus Scan 2500: Gebruikershandleiding (7 pagina's), Productinformatieblad (4 pagina's), Specificaties (2 pagina's), Productinformatieblad (4 pagina's), Product ondersteunings bulletin (12 pagina's), Productinformatie (12 pagina's), Start Here (4 pagina's), Handmatig (11 pagina's), Product ondersteunings bulletin (3 pagina's), Onderdelenlijst (9 pagina's), Online handleiding (10 pagina's), Start Here (4 pagina's), Aanvullende informatie (12 pagina's)

Here are sample printouts.

Good sample

If the nozzle check page does not print satisfactorily (for example, if any segment of

the printed lines is missing), then you should clean the print head as explained below.

If the printout was satisfactory, you are ready to print your first page.

Cleaning the Print Head

Make sure that the Operate light is on and that an ink out message is not displayed

on the LCD panel.

Hold down the

The Stylus Scan starts cleaning the print head and the Operate light begins

flashing. Print head cleaning takes about one minute to complete.

Caution:

Never turn off the Stylus Scan while the Operate light is flashing.

Doing so may damage the Stylus Scan.

When the Operate light stops flashing, print a few lines from a document to

confirm that the head is clean and to reset the cleaning cycle.

If print quality hasn't improved after checking the nozzles and cleaning four or five

times, contact your dealer.

Checking the Stylus Scan

cleaning button for three seconds.

Print head needs to be cleaned

segments are missing