Epson LQ-1170 Product ondersteunings bulletin - Pagina 10

Blader online of download pdf Product ondersteunings bulletin voor {categorie_naam} Epson LQ-1170. Epson LQ-1170 16 pagina's. Understanding and using escp/3 commands and syntax
Ook voor Epson LQ-1170: Handmatig (5 pagina's), Product ondersteunings bulletin (20 pagina's), Product ondersteunings bulletin (5 pagina's), Technisch overzicht (7 pagina's), Installatiehandleiding (1 pagina's), Montagehandleiding (8 pagina's), Product ondersteunings bulletin (20 pagina's)

Epson LQ-1170 Product ondersteunings bulletin
ESC ( t nl n2 dl .d2 d3 (Assign Character Tabie)
selectable with the ESC t n command. This is the table that will be replaced. Valid
corresponding to a registered table. lhii is the table that will replace the table
indicated by Variable d1. Valid Values for d2 are 0, 1,3,7,8, and 9 (see Table 2
dl
I
0 -1 Italic
Table 1
After using the ESC ( t command, the ESC t n command MUST be sent to select the
table before printing from the new table. For example, the command ESC ( t 3 0 1 3
0 is sent (assign Registered Table 3 (PC950) to Selectable Table 1 (PC437). In order
to print the Q character (ASCII 245), the command ESC t 1 must be sent. In the Basic
programming language, the sequence would be as follows:
LPRINT CHR$(27);7';CHR$(l);
LPRINT CHR$(245)
Some ESC/P2 documentation may illustrate as many as 22 different Registered
Tables. The Registered Tables are a part of the character set, therefore, they are
contained in the Character Generator ROM. The CG ROM differs based upon the
destination country. For thii reason, only the above Registered Tables are available
on LQ-570, LQ-1070, LQ-870 and LQ-1170 printers sold for the U.S. market. Foreign
Character Generator ROMs ARE NOT available in the United States. The following
PSB No: P-0082
Page:
1
I
3
I I 9 I
of
10
14
I
I