Epson LQ-570+ Installatiehandleiding - Pagina 11

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Epson LQ-570+. Epson LQ-570+ 14 pagina's. Sdx acd manager 5.2 printer setup
Ook voor Epson LQ-570+: Product ondersteunings bulletin (20 pagina's), Product ondersteunings bulletin (5 pagina's), Handleiding productinformatie (8 pagina's), Installatiehandleiding (1 pagina's), Handmatig (12 pagina's), Specificaties (2 pagina's), Handmatig (8 pagina's), Product ondersteunings bulletin (16 pagina's), Servicehandleiding (49 pagina's)

Epson LQ-570+ Printer Operation

Removing Continuous Paper from the Pull Tractor

Printer Setup Manual

SDX ACD Manager 5.2

1. To remove continuous paper when using the pull tractor, tear off the paper at a

point before it enters the paper slot.

2. Press the LF/FF button to feed the remaining paper forward, out of the printer.

Set the paper-thickness lever to match the thickness of your paper according to the

table below.

Paper Type

Ordinary paper (with film ribbon)

Thin paper

Ordinary paper (single sheets or continuous)

Multi-part forms (carbonless)

– 2 sheets (original + 1 copy)

– 3 sheets (original + 2 copies)

– 4 sheets (original + 3 copies)

Labels

Envelopes

Note: Print speed is reduced for paper-thickness lever settings of 2 and above.

Removing Continuous Paper from the Pull Tractor

Lever Position

-1

-1 or 0

2 to 3

2 to 5

Epson LQ-570+ Printer Operation - Page 11

38DHB0002UKBP - Issue 1 (March 1999)