Epson LQ-570+ Installatiehandleiding - Pagina 13

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Epson LQ-570+. Epson LQ-570+ 14 pagina's. Sdx acd manager 5.2 printer setup
Ook voor Epson LQ-570+: Product ondersteunings bulletin (20 pagina's), Product ondersteunings bulletin (5 pagina's), Handleiding productinformatie (8 pagina's), Installatiehandleiding (1 pagina's), Handmatig (12 pagina's), Specificaties (2 pagina's), Handmatig (8 pagina's), Product ondersteunings bulletin (16 pagina's), Servicehandleiding (49 pagina's)

Pagina afdrukken

Epson LQ-570+ Printer Operation

Buttons

Printer Setup Manual

SDX ACD Manager 5.2

PAUSE

Press this button to temporarily stop printing. Press this button again to resume

printing.

LOAD/EJECT

Press this button to load single-sheet or continuous paper to the loading position.

However, the printer normally loads paper automatically. If single-sheet paper is

already in the loading position, use this button to eject the sheet. If continuous paper

is in the loading or tear-off position, press this button to feed it backward to the

standby position.

LF/FF (line feed/form feed)

Press this button briefly to feed the paper forward one line. Hold this button down to

eject a single sheet of paper or advance continuous paper to the top of the next

page. You can also use this button to load a single sheet of paper from the

cut-sheet feeder or to feed continuous paper from the standby position to the

loading position.

ALT

Use this button in combination with other buttons to perform the following tasks:

BUFFER CLEAR (PAUSE)

Clears the printer's buffer and initializes the printer settings.

Note: To clear the buffer but save the top-of-form setting, press the PAUSE button;

then press the LF/FF button to advance the paper to the top of the next page; and

then press the ALT and PAUSE buttons at the same time.

MICRO FEED 1' (LOAD/EJECT)

Feeds paper forward in 1/180-inch increments.

MICRO FEED 1, (LF/FF)

Reverse-feeds paper in 1 /180-inch increments.

Bin Select/TEAR OFF

This button selects the paper bin when both optional cut-sheet feeders are installed

and you are printing on single sheets. When printing on continuous paper, press this

button once to feed paper from the loading position to the tear-off position. Press

this button again to feed the paper backward to the loading position.

CONDENSED

Press this button to print condensed characters. Press it again to return to normal

character printing.

FONT

Press this button to select from among the built-in fonts.

You cannot select Roman T or Sans Serif H with this button. You can select these

fonts only with your software.

Note: The typestyle samples on the panel are meant as guides only; actual printed

results may differ slightly.

Epson LQ-570+ Printer Operation - Page 13

38DHB0002UKBP - Issue 1 (March 1999)

Control Panel