Epson TM-L90 series Handleiding productie - Pagina 10

Blader online of download pdf Handleiding productie voor {categorie_naam} Epson TM-L90 series. Epson TM-L90 series 22 pagina's. Attaching cover on the power switch
Ook voor Epson TM-L90 series: Brochure (1 pagina's), Brochure (2 pagina's), Producthandleiding (27 pagina's), Specificaties (2 pagina's), Specificaties (8 pagina's), Informatie handleiding (5 pagina's), Specificaties (4 pagina's), Gebruikershandleiding (40 pagina's), Gebruikershandleiding (17 pagina's), Gebruikershandleiding (21 pagina's), Gebruikershandleiding (21 pagina's), Start Here (2 pagina's), Start Here (2 pagina's), Handmatig (13 pagina's), Gebruiksaanwijzing (12 pagina's), Gebruikershandleiding (36 pagina's), Ontwikkelingshandboek (34 pagina's), Handmatig (2 pagina's)

Confidential

3.7 Automatic Paper Layout Setup

The automatic paper layout setting is a function for the printer to measure the position of the

black mark or the label and to execute the paper layout setting function.

This function can be used only for label paper, receipt paper, or receipt paper with black marks.

To enable the automatic paper layout setting, there are three methods, as follows:

• To select the automatic paper layout setting mode that is provided in the printer

(Refer to the description below)

• To use the memory switch setting utility

(Refer to the user's manual for the memory switch setting utility)

• To control the printer with ESC/POS commands

(Refer to the ESC/POS Application Programming Guide)

If label paper with black marks is used, the paper layout setting must be set manually.

Execution procedure for the automatic paper layout setting mode:

1) Open the paper roll cover.

2) Load the paper roll.

3) Turn the power on while holding down the paper FEED button (located inside the printer),

and continue holding down the paper FEED button until the ERROR LED comes on.

4) Release the paper FEED button once the ERROR LED comes on.

5) Press the paper FEED button (located inside the printer) six times, and then close the

cover.

6) The printer measures the paper layout settings of the paper inserted automatically and

stores them in the NV memory.

7) Once the automatic paper layout setting is performed, the automatic paper layout setting

mode is ended.

TITLE

TM-L90

Roll Paper

Manufacturing Guide

SHEET

NO.

REVISION

SHEET