Epson TM-L90 series Gebruikershandleiding - Pagina 11

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Epson TM-L90 series. Epson TM-L90 series 36 pagina's. Attaching cover on the power switch
Ook voor Epson TM-L90 series: Brochure (1 pagina's), Brochure (2 pagina's), Producthandleiding (27 pagina's), Specificaties (2 pagina's), Specificaties (8 pagina's), Informatie handleiding (5 pagina's), Specificaties (4 pagina's), Gebruikershandleiding (40 pagina's), Gebruikershandleiding (17 pagina's), Gebruikershandleiding (21 pagina's), Gebruikershandleiding (21 pagina's), Handleiding productie (22 pagina's), Start Here (2 pagina's), Start Here (2 pagina's), Handmatig (13 pagina's), Gebruiksaanwijzing (12 pagina's), Ontwikkelingshandboek (34 pagina's), Handmatig (2 pagina's)

Connect the printer to the host computer and the power source.

When installing the printer for the first time, see "Adjusting the

Buzzer Volume" on page 11 before attaching the cover.

Adjusting the Buzzer Volume

Note:

If you want to disable the buzzer or change the buzzer pattern, set the

Memory switches using the memory switch utility.

Remove the cover on the printer bottom, and place the printer as

shown in the illustration below.

Make sure the roll paper is not installed and the roll paper cover is

closed, and the printer power is on.

While hearing the buzzer for a paper out error, adjust the buzzer

volume by turning the knob on the buzzer unit.

Buzzer unit

Install the roll paper. (See "Installing or Replacing the Roll Paper"

on page 14.)

Attach the cover on the rear side of the printer.

Max.

Min.

Knob

TM-L90 User's Manual 11