Epson TM-L90 series Panduan Pengguna - Halaman 11

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Aksesori Printer Epson TM-L90 series. Epson TM-L90 series 36 halaman. Attaching cover on the power switch
Juga untuk Epson TM-L90 series: Brosur (1 halaman), Brosur (2 halaman), Panduan Produk (27 halaman), Spesifikasi (2 halaman), Spesifikasi (8 halaman), Manual Informasi (5 halaman), Spesifikasi (4 halaman), Panduan Pengguna (40 halaman), Panduan Pengguna (17 halaman), Panduan Pengguna (21 halaman), Panduan Pengguna (21 halaman), Panduan Manufaktur (22 halaman), Mulai di sini (2 halaman), Mulai di sini (2 halaman), Manual (13 halaman), Petunjuk Manual (12 halaman), Panduan Pengembangan (34 halaman), Manual (2 halaman)

Connect the printer to the host computer and the power source.

When installing the printer for the first time, see "Adjusting the

Buzzer Volume" on page 11 before attaching the cover.

Adjusting the Buzzer Volume

Note:

If you want to disable the buzzer or change the buzzer pattern, set the

Memory switches using the memory switch utility.

Remove the cover on the printer bottom, and place the printer as

shown in the illustration below.

Make sure the roll paper is not installed and the roll paper cover is

closed, and the printer power is on.

While hearing the buzzer for a paper out error, adjust the buzzer

volume by turning the knob on the buzzer unit.

Buzzer unit

Install the roll paper. (See "Installing or Replacing the Roll Paper"

on page 14.)

Attach the cover on the rear side of the printer.

Max.

Min.

Knob

TM-L90 User's Manual 11