Epson ActionTower 3000 Computer Lees deze eerste handleiding - Pagina 23

Blader online of download pdf Lees deze eerste handleiding voor {categorie_naam} Epson ActionTower 3000 Computer. Epson ActionTower 3000 Computer 29 pagina's. Product information guide
Ook voor Epson ActionTower 3000 Computer: Gebruikershandleiding (34 pagina's), Gebruikershandleiding (38 pagina's), Cartridges vervangen (2 pagina's), Handleiding productinformatie (11 pagina's), Handleiding voor snelle installatie (4 pagina's)

Also check the following switches in the

command line in your AUTOEXEC.BAT file:

Some Sound Blaster games require settings that match

those of your sound card. Check your game

documentation to see how to change the game's

settings to match those of your sound card.

Make a note of the DMA and IRQ settings in the

Windows SYSTEM.INI file for the Mozart driver. The

default settings are as follows:

Use the Windows Control Panel to view the current

settings. Select Drivers; then select Mozart Audio

Device Driver from the list displayed and click on

Setup.

Now check the DMA, IRQ, base I/O address, CD-ROM

I/O address, and CD-ROM IRQ settings of the driver(s)

in your CONFIG.SYS file for the optional card you have

installed. See the card documentation for information

about identifying the driver and its switches.

If there is a conflict between these settings, test the sound

card to see if it works properly when the optional card

driver is not installed. To do this, edit the CONFIG.SYS

file and insert the letters

space at the beginning of the line containing the driver

installation command. This temporarily disables the

command. Reboot your system.

2 0

Read This First

Base I/ 0:

DMA:

IRQ :

DMA=0

IRQ=11

You see the DMA and IRQ (Interrupt) settings.

/ Annn

/ Dn

/ In

(for remark) followed by a

REM

SET

BLASTER