Epson ActionTower 3000 Computer Прочитайте цей перший посібник - Сторінка 23

Переглянути онлайн або завантажити pdf Прочитайте цей перший посібник для Робочий стіл Epson ActionTower 3000 Computer. Epson ActionTower 3000 Computer 29 сторінок. Product information guide
Також для Epson ActionTower 3000 Computer: Посібник користувача (34 сторінок), Посібник користувача (38 сторінок), Заміна картриджів (2 сторінок), Інформаційний посібник про продукт (11 сторінок), Посібник з швидкого налаштування (4 сторінок)

Also check the following switches in the

command line in your AUTOEXEC.BAT file:

Some Sound Blaster games require settings that match

those of your sound card. Check your game

documentation to see how to change the game's

settings to match those of your sound card.

Make a note of the DMA and IRQ settings in the

Windows SYSTEM.INI file for the Mozart driver. The

default settings are as follows:

Use the Windows Control Panel to view the current

settings. Select Drivers; then select Mozart Audio

Device Driver from the list displayed and click on

Setup.

Now check the DMA, IRQ, base I/O address, CD-ROM

I/O address, and CD-ROM IRQ settings of the driver(s)

in your CONFIG.SYS file for the optional card you have

installed. See the card documentation for information

about identifying the driver and its switches.

If there is a conflict between these settings, test the sound

card to see if it works properly when the optional card

driver is not installed. To do this, edit the CONFIG.SYS

file and insert the letters

space at the beginning of the line containing the driver

installation command. This temporarily disables the

command. Reboot your system.

2 0

Read This First

Base I/ 0:

DMA:

IRQ :

DMA=0

IRQ=11

You see the DMA and IRQ (Interrupt) settings.

/ Annn

/ Dn

/ In

(for remark) followed by a

REM

SET

BLASTER