Motorola CDM1250 Gebruikershandleiding - Pagina 31

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Motorola CDM1250. Motorola CDM1250 50 pagina's. Cdm-series control station
Ook voor Motorola CDM1250: Service- en installatiehandleiding (32 pagina's)

Pagina afdrukken

SCAN

Your radio can monitor multiple channels in a

scan list. Your dealer can program up to 16

different channels into each scan list. When

your radio detects activity on a scan list

channel, it will automatically switch to that

channel.

Note: The same channels can be assigned to

different scan lists.

STARTING OR STOPPING SCAN

The G symbol, and the number of the

channel you are transmitting on, will appear on

the display when you start a scan operation.

The green LED indicator blinks during a scan

operation and stops blinking when the radio

switches to a channel.

Note: If you enter Menu Mode while the radio

is scanning, scanning will stop. It will

resume when you exit Menu Mode.

You can start or stop a scan operation in one of

three ways:

Method 1

Press the preprogrammed Scan button (see

page 6) to start or stop scanning.

–or–

Method 2 (with the enhanced keypad

microphone)

1 Press the Menu/Enter button to enter Menu

Mode.

until

3 Press the Menu/Enter

button to select

until

–or–

5 Press the Menu/Enter button to confirm your

selection.

–or–

Method 3

If programmed by your dealer, the radio will

start scanning when you select a channel that

has auto scan enabled.

System Scan

Sys Scan On?

Sys Scan Off?

English