Epson Equity III Product ondersteunings bulletin

Blader online of download pdf Product ondersteunings bulletin voor {categorie_naam} Epson Equity III. Epson Equity III 45 pagina's. Product support bulletin(s)
Ook voor Epson Equity III: Product ondersteunings bulletin (3 pagina's), Product ondersteunings bulletin (19 pagina's), Producthandleiding (13 pagina's)

Product Support Bulletin

Subject: Proper Method for Running Benchmark and Diagnostics Programs

Date: 06/04/93

Page(s): 1 of 1

This bulletin describes the proper method for running any benchmark or diagnostics

programs. This applies to any computer system.

In most cases, the computer should be started using an MS-DOS boot diskette

that's 'clean' - in other words, one with no CONFIG.SYS or AUTOEXEC.BAT files.

The appropriate executable can then be run, either from diskette or hard drive.

There will be some exceptions to the above rule. In attempting to benchmark or

troubleshoot any add-on that requires a device driver (CD-ROM, local area network,

etc.), obviously the necessary device driver(s) must be loaded. Also, some

programs will require a minimum number of FILES or BUFFERS to be defined in

the CONFIG.SYS file. Such programs will usually display this requirement if they

are run without the necessary CONFIG.SYS file.

For the most consistent results, use the absolute minimal boot configuration that's

allowed by the hardware being tested.

EPSON

PSB No: S-0158

Originator: MWT