Epson Equity III Product ondersteunings bulletin - Pagina 45

Blader online of download pdf Product ondersteunings bulletin voor {categorie_naam} Epson Equity III. Epson Equity III 45 pagina's. Product support bulletin(s)
Ook voor Epson Equity III: Product ondersteunings bulletin (3 pagina's), Product ondersteunings bulletin (19 pagina's), Producthandleiding (13 pagina's)

Epson Equity  III Product ondersteunings bulletin
NUMBER:
S-0001C
*****IMPORTANT**************IMPORTANT **++****+**+*+++++IMpQRTANT*****
*
*
ALWAYS FORMAT THE HDD WITH THE SAME VERSION CONTROLLER
*
BOARD AND HDC CPU FIRMWARE VERSION IT WILL BE USED
*
NOT
IT IS
UPGRADED AS LONG AS THE SAME FIRMWARE CPU
FOR LOW LEVEL FORMATTING:
1. EQUITY I/II
See
PSB
procedure using software which is included with each system.
2. EQUITY III
a. Run PFORMAT - Enter bad tracks - Time approx. 5 minutes.
b. Run HDFMTALL - Time approx. 8 minutes.
Run HDPART - Time approx. 2 minutes.
C .
d. Run HDFORMAT - Time approx. 5 minutes.
3.
EQUITY
III+
Notes:
Early
production
1.
upgraded with the CAC version VF0 SUB-board to operate
with a hard drive.
2. Equity I, DOS ver. 2.11 problem - Bad sector information
erased
when
Corrected in DOS version 2.2 (MSA-B3) and 2.21 (MSA-B4).
3. Equity I/II - HDFMTALL erases bad sector information.
Delete HDFMTALL from the system disk.
HARD
DISK
FORMATTING
NECESSARY
TO
REFORMAT
F O R M A T
#
S-0005
titled
F O R M A T
-
See
Product
Equity
I
HDFORMAT
(MS-DOS
INFORMATION
THE
ROM
IF
Equity
HDD
I/II
Support
Bulletin
units
without
HDD
utility)
executes
5 of 5
PAGE:
WITH.
BIOS IS
USED.
IS
intialization
#
S-0006
must
be
S
formatting.
*
*
*
*